Problem Description
What is the melting point of 0.38mm cutting wire?
What is the melting point of 0.50mm cutting wire?
solution
EPS cutting melting point is also called EPS cutting line melting point. Generally speaking, the melting point is twice the diameter of the cutting wire.
For 0.38mm cutting wire, the melting point is about 0.76mm.
For 0.50 mm cutting wire, the melting point is approximately 1 mm.
If the EPS block is particularly difficult to cut, e.g.
The EPS block contains too much water
The density of EPS blocks is too high
EPS beans have uneven density
The moisture content around the EPS block is high and the moisture content inside is low
Then it is necessary to increase the current of the cutting wire. When the current increases, the melting point of the cutting wire of the same diameter will become larger.
Therefore, choosing high-quality cutting wire, stable-quality EPS blocks, and stable EPS cutting lines are crucial for cutting efficiency and cutting quality.