What are the characteristics of foam box production equipment
1. Anti-aging and corrosion resistance: Except for long-term exposure to high-energy radiation, there is no obvious aging. It is resistant to dilute acid, dilute alkali, methanol, lime, asphalt and other chemicals.
2. Lightweight: Replace part of the packaging product space with gas, with 300-6 million independent sealed bubbles per cubic decimeter. Therefore, it is several tens of times that of plastic.
3. Good sound insulation performance: Its sound insulation is mainly through two ways, one is to absorb sound energy, reducing reflection and transmission; the other is to muffling and reducing noise.
4. Thermal insulation performance: the thermal conductivity is the weighted average of pure EPS (108 cal/M. H) and air thermal conductivity (about 90 cal/M. H).
5. Antistatic performance: Due to its low electrical conductivity, it is easy to generate its own electrification during the friction process, which will not affect the products of general users. For high-precision electronic products, especially large-scale integrated structural components of modern electronics, electrostatic foam equipment boxes should be used.
6. Ability to absorb impact load: When the impact load acts, the gas in the foam consumes and dissipates external energy through stagnation and compression, and the bubble gradually terminates the impact load with a small negative acceleration, which has a good seismic effect. The foam box production equipment is so popular because it has many advantages, advantages and disadvantages. I believe that with the development of science and technology, the shortcomings will gradually be overcome.
EPS building modular equipment, also called EPS insulation module product technology: EPS building modular equipment EPS component technology is the innovation and development of traditional Chinese block masonry walls for thousands of years. In order to reduce or eliminate the family's dependence on fossil energy in heating and cooling, reduce or eliminate the emission of harmful gases and harmful substances, and provide reliable technical support for the construction of beautiful villages.
Advantages: EPS modular device adopts two-step foaming method for one-time molding, which has the advantages of uniform fusion, high compressive strength, stable technical indicators, and geometric dimensions. Product appearance: The product has various shapes and meets the 3 m structure modulus. The outer edge is provided with a socket, and the inner and outer surfaces are provided with a dovetail groove.
Scope of application: It can be used to build multi-storey low-rise civil buildings with environmental protection, energy saving, high efficiency, and strong disaster resistance, as well as large-scale cold storage, non-heating agricultural machinery warehouse and animal husbandry greenhouse. Product introduction: The EPS cavity module is sealed with the concrete and thick plastering protective surface, which improves the impact resistance, durability and fire resistance of the composite wall, and realizes the integration of the EPS module heat insulation and the building structure, and the service life is the same.
The density of the EPS cavity components is 30 kg/m3, the flame retardant grade is B1, and the thermal conductivity is less than 0.033 w/(m·K), which can meet the national building energy saving requirement of 75%. EPS module is based on the requirements of building modularization, energy-saving standards, building structure, structural system, and construction technology. It uses special equipment and molds, and is produced under high temperature and vacuum, without the need for large-scale board cutting.
Uniform melting, high compressive strength, stable technical indicators, geometric dimensions, and a negative error of 0.2 mm.
The technology is easy to construct, and the building structure is similar to the building block structure. It completely replaces clay bricks and masonry walls, eliminates outdated technology and production capacity, discards traditional building technology, and realizes the integration of building insulation materials and building templates, the integration of building insulation materials and building structures, industrialization and standardization .
Proprietary intellectual property technology realizes the factory production of building parts, the assembly of the construction site, the refinement of the project quality and the comfort of the indoor environment. Provide reliable construction technology and economical and practical building components for low-energy and disaster-resistant houses, large-scale cold storages, large-scale non-heating facilities, agricultural machinery warehouses, industrial greenhouses, etc. in fortified areas of different earthquake intensities.
The EPS module is organically combined with the cast-in-place concrete structure or recycled concrete structure, so that the economic and technical indicators of the house are compared with the traditional clay brick house. Energy loss is reduced by 15%, the construction speed is increased by more than 50%, and the usable area is increased by 10%. Heat insulation and air tightness can reach the performance indicators of passive houses, and the disaster resistance of the structure can be greatly improved to prevent accidents. In the future, there will be zero deaths due to earthquake disasters of 8 degrees. We completely bid farewell to the collapse of houses caused by natural disasters, unfavorable social collapse, unfavorable social collapse, and unfavorable social collapse. Soil resources can protect and protect the soil, not only can be used for the effective recycling of composite wall garbage,
The good mechanical properties of EPS building module equipment and the uniform distribution of the inner and outer surfaces of the dovetail groove are organically combined with the concrete structure and protective layer, which improves the impact resistance, durability and fire resistance of the wall, and realizes the module layer and the cast-in-place concrete load-bearing wall The same service life.