Precautions for EPS foaming machine maintenance
The so-called EPS foam cutting machine is a kind of equipment used to process foam, sponge and other materials required by the chemical industry. Currently, lasers are mainly used for cutting. Because the fine cutting of the laser beam is not easy to deform, the cut is smooth, and the edge is not blurred, it is currently used in various fields. Of course, in the process of using the foam cutting machine, it will inevitably lead to failure and need to be repaired. Now we will state the following precautions during maintenance.
Only those who know how to use this operation can repair or replace components! In order to prevent accidents or machine damage, the following principles must be observed during the inspection:
1. When a failure occurs, disconnect the power supply and stop the machine;
2. When the machine cannot be used normally, consult the manual and operation manual to determine the correct measures to be taken; before checking or replacing components, the power must be turned off.
3. The parts (parts) removed during the inspection should be replaced with the same new parts (parts) at the same place. The instruments used during the inspection must be calibrated.
4. It is forbidden to place flammable or metal objects in the electric cabinet or junction box;
5. Regularly check whether the cables and wires are damaged to prevent leakage or electric shock