How to inspect the factory foam equipment?
The purpose of factory inspection of foam equipment is to verify whether the quality and configuration of the equipment are qualified. All equipment must undergo strict factory inspection before leaving the factory. How to check factory foam equipment? Foam molding machine manufacturers answer for you.
The appearance of the foam equipment is uniform in color, no primer is exposed, and the paint film has good adhesion. The paint surface has no flow marks, wrinkling and slight damage defects.
The coating of the electroplated parts shall not have peeling, mold release, mildew, rust and other phenomena. All cabin doors should be flexible in opening and closing.
Check whether the indicator light of the foam device is normal and record the status of the indicator light.
Turn on and off the power of a single device several times to observe whether it can work normally and start, and whether there is abnormal sound that does not work normally.
Foam molding equipment manufacturers remind that because cement and other raw materials are difficult to clean, the functional test of the stirring and pumping system is generally a water test, not a physical test, but the foaming system should use a physical test, foam capsules diluted with a foaming agent and an aqueous solution The size should be uniform. The above inspection should be carried out before leaving the factory.