Daily maintenance and maintenance of EPS foam equipment?

Dec 18, 2021 Leave a message

Daily maintenance and maintenance of EPS foam equipment: The foam cutting machine is mainly used for cutting foam materials. The cutting machine can cut rigid foam, soft foam, and plastic into squares, rectangles, strips, etc., with high cutting efficiency and accurate cutting size , The advantages of high accuracy.

Daily maintenance and maintenance of foam model cutting machine:

1. Do not put the cutting machine in direct sunlight, try to avoid the sun's exposure to cause the equipment to deform and crack.

2. Try to keep the equipment surface clean and tidy. Do not stick adhesive paper or other items on the surface of the table. Do not scratch on the surface of the cutting machine. If there is dust on the equipment, please wipe it with a wet towel and soapy water. Do not use alcohol. , Thinner and other corrosive chemicals to wipe equipment.

3. When the equipment is in use, if it is difficult to move the front and rear right-angle slides and the left and right sides of the ruler, please clean up the dust and debris in the track and use the 4B-B pencil lead to paint back and forth on both sides of the sliding track and the lower guide rail of the sliding plate. , The cutting machine can resume smoothly as new when sliding.

The foam incubator also has this function

The foam pre-expander tells you the foaming method of foam

Send Inquiry

Fast Mold Change EPS Machine with steam chamber
Fully automatic Fast Mold Change EPS Machine with steam chamber is quite suitable for making various package products with all kinds of molds. The kind of EPS Machine fast mold change combines water cooling and vacuum cooling perfectly. Low pressure molding and high temperature demoulding are the core technologies to achieve energy saving and consumption reduction, shorten the cycle. The perfect design and combination make EPS Machine Fast Mold Change have excellent performance, which has been well reflected in PUSHENG machines.
Vacuum Type Automatic EPS Machine for cornice
Auto eps making machine made by Hangzhou Pusheng company are widely used for producing various eps foam products, such as fish box, vegetable box, seedling tray, home appliance package, icf blocks, fast food box, ceiling cornice, lost foam casting, construction blocks, etc.
Vacuum Type Automatic Forming Machine
Auto eps making machine made by Hangzhou Pusheng company are widely used for producing various eps foam products, such as fish box, vegetable box, seedling tray, home appliance package, icf blocks, fast food box, ceiling cornice, lost foam casting, construction blocks, etc.